ISSN: 2717-7203

Instructions for Authors

Terms of Submission

Papers must be submitted on the understanding that they have not been published elsewhere and are not currently under consideration by another journal or any other publisher. The submitting author is responsible for ensuring that the article's publication has been approved by all the other coauthors. It is also the authors' responsibility to ensure that the articles emanating from a particular institution are submitted with the approval of the necessary institution. Only an acknowledgment from the editorial office officially establishes the date of receipt. Further correspondence and proofs will be sent to the author(s) before publication unless otherwise indicated. It is a condition of submission of a paper that the authors permit editing of the paper for readability. All enquiries concerning the publication of accepted papers should be addressed to jame@yildiz.edu.tr.

Peer Review Process

Journal of Advances in Manufacturing Engineering utilizes a double-blind peer review process where both the identities of reviewers and authors are anonymous. The editor-in-chief is responsible of the editorial and scientific content of the journal and makes the final decision.

Submitted manuscripts that pass preliminary control are evaluated by editor-in-chief for their originality, methodology, the importance of the subject covered and compliance with the journal scope. For the manuscripts that are considered for publication an unbiased, double-blinded peer-review process is initiated by associate editors. The manuscripts are sent to two or more independent peer reviewers who are expert in the field. The reviewers are asked to provide detailed, constructive comments that will help the editor to make a decision, and the authors to improve their manuscript. The requested changes are made by the authors using the online manuscript submission system. Associate editor sends the original manuscript, the revised manuscript and all the reviewers’ comments together with his recommendation to the editor-in-chief.

Editor-in-chief reviews the manuscript and makes the final decision. He might accept the manuscript, reject the manuscript or request further revisions.

In case of manuscripts submitted by editors or by the editorial board members of the journal, the editorial board will invite an external and independent editor to manage the evaluation processes of these manuscripts. The reviewers are required to notify the editor of any kinds of conflicts of interest with respect to the research, the authors and/or the research funders. They must ensure that all the information related to submitted manuscripts is kept as confidential and must report to the Editor-in-Chief if they are aware of copyright infringement and plagiarism on the author’s side.

Journal of Advances in Manufacturing Engineering takes into consideration the Committee on Publication Ethics - COPE guidelines and flow charts for peer review process.

Editorial Board Members' Submission and Review Process

In cases where a member of the Editorial Board is an author or co-author of a submitted manuscript, strict conflict of interest protocols are followed.

The involved Editorial Board member will be completely excluded from the review process of their submission.

An independent review coordinator, not affiliated with the Editorial Board, will be appointed to manage the peer-review process for such submissions.

The identity of the reviewers will remain confidential, adhering to our double-blind review policy.

Editorial Board members will not have access to any information or discussion related to the evaluation of their manuscript.

Decisions on these manuscripts will be made based on the same criteria and rigorous review process applied to all other submissions, ensuring fairness and impartiality.

Only one article per year can be published by the Editorial Board members. 


Plagiarism Detection

All submissions are screened using similarity detection software (iThenticate) at least two times: on submission and after completing revisions. In the event of alleged or suspected research misconduct, e.g., plagiarism, citation manipulation, or data falsification/fabrication, the editorial board will follow and act in accordance with COPE guidelines. Plagiarism, including self-plagiarism, that is detected at any stage will result in rejection of the manuscript.

Title and Authorship Information

The following information should be included

  • Paper title
  • Full author names
  • Full institutional mailing addresses

Abstract

The manuscript should contain an abstract. The abstract should be self-contained and citation-free and should not exceed 200 words. An abstract showing the novelty and main findings of the study should be written in the abstract section. The number of keywords should be between 3-5.

Introduction

Journal of Advances Manifacturing Engineering (JEMS) aims to encourage and publish research studies about the challenges and opportunities associated with considerable numbers of understandings in the manifacturing sector. Besides, JAME also aims to reach out to relevant audiences by publishing the latest scientific and technological developments. JEMS journal, is published periodically and regularly. Scope of the journal covers national, international and local studies regarding Manifacturing Engineering, Quality Engineering, Industrial Engineering, Production Engineering, Mechanichal Engineering, Automotive Engineering and Mechatronic Engineering. This section should be succinct, with no subheadings.

Materials and Methods

This part should contain sufficient detail so that all procedures can be repeated. It can be divided into subsections if several methods are described.

Results and Discussion

This section may each be divided by subheadings or may be combined.

Conclusions

This should clearly explain the main conclusions of the work highlighting its importance and relevance.

Articles include Acknowledgments, Data Avability Statement, Author's Contribution, Conflict of Interest, Ethics sections after the conclusion section.

Acknowledgments

All acknowledgments (if any) should be included at the very end of the paper before the references and may include supporting grants, presentations, and so forth.

Data Availability Statement

It is stated that the published publication includes all graphics and data collected or developed during the study.

Author’s Contributions

All authors' contributions to the article are indicated.

Conflict of Interest

Authors must declare that they have no potential conflicts of interest regarding the research, authorship and/or publication of this article.

Ethics

It should be noted that there was no ethical issues in publishing the article.

References

Authors are responsible for ensuring that the information in each reference is complete and accurate. All references must be numbered consecutively and citations of references in text should be identified using numbers in square brackets (e.g., “as discussed by Smith [9]”; “as discussed elsewhere [9, 10]”). All references should be cited within the text; otherwise, these references will be automatically removed. References should be written according to the APA 6. Reference Style Guide. In the table below, you can see examples of references conforming to APA.

References style;

Journal Article

Grady, J. S., Her, M., Moreno, G., Perez, C., & Yelinek, J. (2019). Emotions in storybooks: A comparison of storybooks that represent ethnic and racial groups in the United States. Psychology of Popular Media Culture, 8(3), 207–217. https://doi.org/10.1037/ppm0000185

If a journal article has a DOI, include the DOI in the reference.

Journal article with an article number

Jerrentrup, A., Mueller, T., Glowalla, U., Herder, M., Henrichs, N., Neubauer, A., & Schaefer, J. R. (2018). Teaching medicine with the help of “Dr. House.” PLoS ONE, 13(3), Article e0193972. https://doi.org/10.1371/journal.pone.0193972

If the journal article has an article number instead of a page range, include the word “Article” and then the article number instead of the page range.

Journal article with missing information

Missing volume number

Stegmeir, M. (2016). Climate change: New discipline practices promote college access. The Journal of College Admission, (231), 44–47. https://www.nxtbook.com/ygsreprints/NACAC/nacac_jca_spring2016/#/46

Missing issue number

Sanchiz, M., Chevalier, A., & Amadieu, F. (2017). How do older and young adults start searching for information? Impact of age, domain knowledge and problem complexity on the different steps of information searching. Computers in Human Behavior, 72, 67–78. https://doi.org/10.1016/j.chb.2017.02.038

Missing page or article number

Butler, J. (2017). Where access meets multimodality: The case of ASL music videos. Kairos: A Journal of Rhetoric, Technology, and Pedagogy, 21(1). http://technorhetoric.net/21.1/topoi/butler/index.html

Retracted journal article

Joly, J. F., Stapel, D. A., & Lindenberg, S. M. (2008). Silence and table manners: When environments activate norms. Personality and Social Psychology Bulletin, 34(8), 1047–1056. https://doi.org/10.1177/0146167208318401 (Retraction published 2012, Personality and Social Psychology Bulletin, 38[10], 1378)

Book

Jackson, L. M. (2019). The psychology of prejudice: From attitudes to social action (2nd ed.). American Psychological Association. https://doi.org/10.1037/0000168-000

Sapolsky, R. M. (2017). Behave: The biology of humans at our best and worst. Penguin Books.

Svendsen, S., & Løber, L. (2020). The big picture/Academic writing: The one-hour guide (3rd digital ed.). Hans Reitzel Forlag. https://thebigpicture-academicwriting.digi.hansreitzel.dk/

Edited Book

Hygum, E., & Pedersen, P. M. (Eds.). (2010). Early childhood education: Values and practices in Denmark. Hans Reitzels Forlag. https://earlychildhoodeducation.digi.hansreitzel.dk/

Kesharwani, P. (Ed.). (2020). Nanotechnology based approaches for tuberculosis treatment. Academic Press.

Torino, G. C., Rivera, D. P., Capodilupo, C. M., Nadal, K. L., & Sue, D. W. (Eds.). (2019). Microaggression theory: Influence and implications. John Wiley & Sons. https://doi.org/10.1002/9781119466642

Republished book, with editor

Watson, J. B., & Rayner, R. (2013). Conditioned emotional reactions: The case of Little Albert (D. Webb, Ed.). CreateSpace Independent Publishing Platform. http://a.co/06Se6Na (Original work published 1920)

Book published with new foreword by another author

Kübler-Ross, E. (with Byock, I.). (2014). On death & dying: What the dying have to teach doctors, nurses, clergy & their own families (50th anniversary ed.). Scribner. (Original work published 1969)

Several volumes of a multivolume work

Harris, K. R., Graham, S., & Urdan T. (Eds.). (2012). APA educational psychology handbook (Vols. 1–3). American Psychological Association.

Chapter in an edited book

Aron, L., Botella, M., & Lubart, T. (2019). Culinary arts: Talent and their development. In R. F. Subotnik, P. Olszewski-Kubilius, & F. C. Worrell (Eds.), The psychology of high performance: Developing human potential into domain-specific talent (pp. 345–359). American Psychological Association. https://doi.org/10.1037/0000120-016

Chapter in an edited book, reprinted from another book

Bronfenbrenner, U. (2005). The social ecology of human development: A retrospective conclusion. In U. Bronfenbrenner (Ed.), Making human beings human: Bioecological perspectives on human development (pp. 27–40). SAGE Publications. (Reprinted from Brain and intelligence: The ecology of child development, pp. 113–123, by F. Richardson, Ed., 1973, National Educational Press)

Report with Individual Authors References

This page contains reference examples for reports with individual authors.

Baral, P., Larsen, M., & Archer, M. (2019). Does money grow on trees? Restoration financing in Southeast Asia. Atlantic Council. https://www.atlanticcouncil.org/in-depth-research-reports/report/does-money-grow-on-trees-restoring-financing-in-southeast-asia/

Stuster, J., Adolf, J., Byrne, V., & Greene, M. (2018). Human exploration of Mars: Preliminary lists of crew tasks (Report No. NASA/CR-2018-220043). National Aeronautics and Space Administration. https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190001401.pdf

Report by a Government Agency References

This page contains a reference example for a report by a government agency.

National Cancer Institute. (2019). Taking time: Support for people with cancer (NIH Publication No. 18-2059). U.S. Department of Health and Human Services, National Institutes of Health. https://www.cancer.gov/publications/patient-education/takingtime.pdf

Conference Paper in Print

Jang, S. (2019, August 8–11). Deconstructing the opposition of natural/arbitrary in Coleridge’s theory of language [Paper presentation]. NASSR 2019: Romantic Elements, Chicago, IL, United States.

Conference Proceedings

Author Surname, First Initial. Second Initial. (Year). Conference paper title. In Editor First Initial. Editor Surname (Ed.), Proceedings Book Title (pp. page range of paper). Place of Publication: Publisher. Armstrong, D. B., Fogarty, G. J., & Dingsdag, D. (2007). Scales measuring characteristics of small business information systems. In W-G. Tan (Ed.), Proceedings of Research, Relevance and Rigour: Coming of age: 18th Australasian Conference on Information Systems (pp. 163-171). Toowoomba, Australia: University of Southern Queensland.

Thesis

Author, A. A. (date). Title of doctoral dissertation or master's thesis (Doctoral dissertation or Master's thesis). Available from Name of database. (Accession or Order No.)

Pflieger, J. C. (2009). Adolescents' parent and peer relations and romantic outcomes in young adulthood (Doctoral dissertation). Available from ProQuest Dissertations & Theses Global database. (UMI No. 3371229)

Preparation of Figures

Upon submission of an article, authors are supposed to include all figures and tables in the PDF file of the manuscript. Figures and tables should not be submitted in separate files. If the article is accepted, authors will be asked to provide the source files of the figures. Each figure should be supplied in a separate electronic file. All figures should be cited in the paper in a consecutive order. Figures should be supplied in either vector art formats (Illustrator, EPS, WMF, FreeHand, CorelDraw, PowerPoint, Excel, etc.) or bitmap formats (Photoshop, TIFF, GIF, JPEG, etc.). Bitmap images should be of 300 dpi resolution at least unless the resolution is intentionally set to a lower level for scientific reasons. If a bitmap image has labels, the image and labels should be embedded in separate layers.

Preparation of Tables

Tables should be cited consecutively in the text. Every table must have a descriptive title and if numerical measurements are given, the units should be included in the column heading. Vertical rules should not be used.

Proofs

Corrected proofs must be returned to the publisher within 2-3 days of receipt. The publisher will do everything possible to ensure prompt publication. It will therefore be appreciated if the manuscripts and figures conform from the outset to the style of the journal.

Authorship Criteria

All persons designated as authors should qualify for authorship, and all those who qualify should be listed. Each author should have participated sufficiently in the work to take public responsibility for appropriate portions of the content. One or more authors should take responsibility for the integrity of the work as a whole, from inception to published article.

Authorship credit should be based only on; (1) substantial contributions to conception and design, or acquisition of data, or analysis and interpretation of data, (2) drafting the article or revising it critically for important intellectual content, and (3) final approval of the version to be published. Conditions 1, 2, and 3 must all be met. Acquisition of funding, the collection of data, or general supervision of the research group, by themselves, do not justify authorship. All others who contributed to the work who are not listed as authors should be named in the acknowledgments, and their contribution should be described. Authorship of multicenter trials is attributed to a group. All members of the group who are named as authors should fully meet the above criteria for authorship. Group members who do not meet these criteria should be listed, with their permission, in the acknowledgments. Financial and material support should also be acknowledged.

All statements and opinions expressed in the manuscripts published in Journal of Advances in Manufacturing reflect the views of the author(s). All liability for the advertisements rests with the appropriate organization(s). The Editor-in-Chief, and Kare Publishing do not accept any responsibility for claims made in articles or advertisements.

Copyright Statement

The author(s) agrees that:

The manuscript submitted is his/her/their own original work, and has not been plagiarized from any prior work,

all authors participated in the work in a substantive way, and are prepared to take public responsibility for the work,

all authors have seen and approved the manuscript as submitted,

the manuscript has not been published and is not being submitted or considered for publication elsewhere,

the text, illustrations, and any other materials included in the manuscript do not infringe upon any existing copyright or other rights of anyone.

Journal of Advances in Manufacturing Engineering (Yildiz Technical University) will publish the content under Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license that gives permission to copy and redistribute the material in any medium or format other than commercial purposes as well as remix, transform and build upon the material by providing appropriate credit to the original work.

The Contributor(s) or, if applicable the Contributor’s Employer, retain(s) all proprietary rights in addition to copyright, patent rights.