2Department of Mechanical Engineering, Faculty of Engineering, Bursa Uludağ University, Bursa, Türkiye
Abstract
Accurate prediction of machining responses is essential for improving production efficiency and reducing manufacturing costs. Among numerical approaches, the finite element method (FEM) has been widely employed to investigate machining phenomena such as cutting forces, temperature distribution, and chip formation. Since cutting forces directly influence machining power, tool wear, and tool life, their reliable prediction strongly depends on the selection of appropriate constitutive models and chip separation strategies. In particular, the numerical treatment of the chip separation region plays a critical role in achieving stable chip formation and accurate force prediction. In this study, a two-dimensional orthogonal cutting model of AISI 1018 steel was developed using a coupled Arbitrary Lagrangian–Eulerian (ALE) and Lagrangian (LAG) finite element
formulation. A dedicated low-damage chip separation region, discretized using four elements through the chip thickness, was introduced to improve chip separation stability while minimizing excessive mesh distortion. Cutting forces were predicted using the Johnson–Cook constitutive and damage models, and the numerical results were validated against experimental measurements. The proposed modeling strategy showed good agreement with the experimental cutting forces, demonstrating its capability to accurately predict the machining behavior of AISI 1018 steel. Furthermore, the results indicated that an appropriately defined low-damage chip separation region minimizes localized damage on the chip surface at higher cutting speeds, leading to smoother chip evolution and lower cutting forces. The proposed approach provides a reliable and computationally efficient framework for finite element simulation of orthogonal machining.

